Riverside County                                                                                                                                                                                      (800) FASTGLASS                                                                                                                                                                                                         

 

 

SINGLE EURO PANELS... THIS  3/8" FIXED PANEL CONFIGURATION IS FOR THE SHOWER AREA LIMITED ON SPACE

 

FRAMELESS CORNER SHOWERS WITH 90' RETURN ON TOP OF TUBS AND PONY WALLS---OUR VIEW.. ON FIXED WET-GLAZED PANELS AVOID PUTTING THE WRONG TYPES OF SEALANT. 100% NON-MOLDING SILICONE WILL DO THE JOB BETTER THAN A MIXTURE OF CAULKING & SILICONE.

 

SINGLE FRAMELESS SHOWERDOORS WITH IN-LINE PANEL---OUR VIEW..WHEN STARTING THE JOB, USE CUSTOM GLASS SIZES TO ALLOW ONE TO CENTER THE HINGES ON A TILES, ADD DOG-LEGS TO EDGES FOR A TIGHTER FIT AND ALWAYS END DOORS & PANELS AT A GROUT LINES.

 

NEO-ANGLE FRAMELESS SHOWERS--- A  FLAT OR OUT-SLOPING DAM TILTED THE WRONG WAY & WE WILL ASK TO HAVE THE TILE OR STONE REINSTALLED WITH AN 1/8" KICK BACK INTO SHOWER AREA OR WE CAN ADD A BOTTOM THRESHOLD TO ASSIST WATERSHED BACK INTO SHOWER.

 

FRAMELESS STEAMER   UNITS.

 

SEMI-FRAMELESS DUAL BI-PASS TUB AND SHOWER ENCLOSURES. OURS FEATURE ROUND, EURO STYLE HEADERS WITH THRU-THE-GLASS TUBULAR AND SOILD TOWEL BARS, STOP-AND-HOLD BUMPERS.

 

TO NOTCH OR NOT TO  NOTCH!

 

GET CLIPS! WE ALWAYS PREFER USING SMALL CLIPS OR EVEN BETTER YET, JUST ROPE TILE NOTCHES TO HOLD OUR GLASS IN PLACE. EVERY ONCE IN AWHILE CHANNEL WHEN INSTALLED CORRECTLY IS A PREFERRED METHOD DUE TO UNEVEN SLATE OR STONE.

  What is Simply Brilliant Shower Doors?? First, we start with 3/8" thick clear tempered safety glass (Yes this is the same thickness of glass you would find surrounding a hockey rink). It's not to say we don't use 1/2" on occasion but 3/8" glass is the preferred thickness for heavy glass. The following reasons are:

1st) 3/8" glass is more clear compared to 1/2" glass which has a slightly greener tint.

2nd) 3/8" glass when used day-in and day-out, its lighter in weight and more user friendly.

3rd) A swinging door that uses this lighter glass will self-center better, the hardware last longer and you still achieve the heavy glass look.

If you are still wanting a 1/2" glass shower door please don't let me discourage you. It is just my opinion that 3/8" is better no matter the cost. Every door we install is custom to the opening. If the grout line is around 30" we will adjust the size of the door and the hinges to meet that line. We place our hinges anywhere from 5" to 10" from the top or bottom. The standard height of the door is around 72" tall (Common height for most shower doors). If the shower door requires a header the height would start at 77". Also, you may notice almost all of the showers we install have a clear polycarbonate swipe on the bottom only. The reason I mention this is because some Glaziers put the swipe material on the sides as well as the bottom to seal in the water. This method means that the door will hit against the polycarbonate when closing and not allow the shower door to open in-wards. We suggest allowing an 1/8" gap between the glass, this will avoid the CLUNK every time you closethe door and this will also do away with that additional seal. Now in some cases Seals should be used & tolerated when the customer has wood floors outside of the shower. And in some cases if the slop is not done with enough of an angle then a seal should be used to lead the water back into the shower. Just a thought, wouldn't you rather the water drip inwards after a shower instead of all over the floor? Whatever I know I'm rambling on but some people would like to hear this stuff.